Municipal Separate Storm Sewer System (MS4)
What is an MS4?
MS4 is short for, “Municipal Separate Storm Sewer System", where the word “Municipal" refers to a unit of local government like a city or town, but may also refer to an organization responsible for the administration of a developed area. And the number 4 refers to the four words that start with the letter “S"; “Separate," “Storm," “Sewer," “System."
A separate storm sewer system is a collection of structures, including retention basins, ditches, roadside inlets and underground pipes, designed to gather stormwater from built-up areas and discharge it, without treatment, into local streams and rivers. It's called a separate system because it's not connected to the sanitary sewer system which drains waste water from inside a home to a sewage treatment facility or a private septic system. Some communities in Pennsylvania do have combined storm and sanitary sewers. The areas served by these “combined systems" are not covered by the MS4 program.
Many rural developments have stormwater management structures, but only communities that the United States Census Bureau classifies as “Urbanized Areas," or UAs, based on population density, are required to become part of the MS4 program. UAs contain plenty of commercial and residential development which produces large amounts of stormwater runoff. Large institutions, like college campuses and hospital complexes, are also part of the MS4 program because they also contain the type of dense development that produces concentrated stormwater flows. Finally, the Connecticut Department of Transportation (CTDOT) are in the MS4 program because of the many separate storm sewer systems they maintain along roads and highways.
The authorization that MS4 communities get from the CTDEEP to legally discharge stormwater into local stream and rivers is called an “NPDES" permit which stands for National Pollution Discharge Elimination System. The word “National" references the connection with the Federal Clean Water Act, and the word “Discharge" refers to the fact that separate storm sewer systems eventually release stormwater into local creeks, rivers, and lakes, untreated. These particular NPDES permits are also commonly called, “MS4 Permits" or “Stormwater Permits." To meet the terms of their NPDES Permit, communities need to develop what's called a “Stormwater Management Program" (SWMP).
Because every MS4 faces unique stormwater challenges each management plan is unique. But every SWMP includes the same six focus areas that the Environmental Protection Agency considers essential for success, called Minimum Control Measures or “MCMs":
1. Public Education and Outreach,
2. Construction Site Erosion Control,
3. Public Participation and Involvement,
4. Post Construction Stormwater Management,
5. Illicit Discharge Detection and Elimination,
6. Pollution Prevention and Good Housekeeping, and
7. Public Education and Outreach.
Because stormwater originates from all corners of a community, including the neighborhoods where people live and work, increasing public stormwater awareness is considered very important. To achieve this goal, municipalities develop community-wide education plans designed to inform residents about what stormwater is, why it requires management, and things they can do to make a difference. Common activities include creating web pages, informational flyers, and brochures and providing presentations at schools and community events.
Public Participation and Involvement
Involving the public in stormwater related activities; including taking actions that improve stormwater at home, work and in the community, is the goal of this MCM. Common activities include public events like tours and workshops focused on best management practices, and seeking public input on stormwater related planning and rule writing when preparing a new, stormwater related ordinance.
Illicit Discharge Detection and Elimination
This MCM involves keeping pollutants out of the separate storm sewer systems. This happens when things other than stormwater get dumped into a storm sewer inlet, and also when storm sewers and sanitary sewers are illegally cross-connected. Examples of illicit substances include septic tank drainage, laundry wash water, paint, automobile oil, grease from restaurant grease traps, and sanitary waste among other things.
Construction Site Erosion Control
Poorly managed construction sites can be a major source of polluted stormwater so MS4s are required to reduce this risk. Activities include procedures to make sure erosion and sediment control practices are installed correctly and maintained as long as needed.
Post Construction Stormwater Management
The goal is making sure new buildings, parking lots and other developments don't create future stormwater headaches. Activities include adopting procedures to ensure structural stormwater management practices are installed and maintained properly after construction, and encouraging developers and builders to install low impact development practices or LID. LID examples include setting aside sensitive lands, like woods and stream buffers, so they can act as stormwater infiltration areas and implementing source control practices, like a street-sweeping program, to capture stormwater pollutants before they get washed away.
Pollution Prevention and Good Housekeeping
This MCM requires reducing stormwater pollution from the maintenance yards, streets, parking lots, buildings and other facilities owned by the municipality or MS4 permit holder. It also includes upkeep of the separate storm sewer system itself.